Antiference A120D Pro 2 Way RemoteLink Distribution Amplifier [XP00198]

Antiference A120D Description

Antiference A120D mains powered 1 in/2 out signal amplifier with F type connectors.

The Antiference Pro series of RemoteLink distribution amplifiers are designed for distributing VHF/UHF, digital and analogue, radio and TV signals in domestic applications.  These TV signal amplifiers are designed to overcome the losses due to splitting of the signal and extra cable lengths needed to distribute signal to each room as well as having the ability to control a Sky receiver via a Magic Eye.

Antiference Pro amplifiers are fully screened for maximum immunity to interference and impulse noise and are fitted with F connectors for reliable and professional installation.

Antiference A120D Features

• Mains powered amps for bigger systems, longer cable runs
• Distribute analogue and digital TV/radio signals, including Freeview, DAB radio, FM radio and analogue TV
• Fully screened with F-Type connectors and LED indicator
• Watch and change SKY channels in 2 extra rooms
• Compatible with Magic Eye remote control senders

Antiference A120D Specification

• No. Inputs: 1
  
• No. Outputs: 2
  
• Frequency Range: 45-862Mhz (VHF & UHF)
  
• Gain (+/- 2dB): 8dB
• Max. Noise: <3.5dB
• Isolation between outputs: >20dB
• Impedance: 75 Ohm
• Max. Output: 78dBuV
• Mains Power: 230V AC +/-10% 50Hz with fitted mains plug

Antiference Amplifier Fitting Advice

The Antiference Pro series of signal amplifiers are mains powered and are intended for indoor use only.  These amplifiers are designed for continuous use.  Do not locate these amplifiers where they may come into contact with moisture or sources of heat.

The signal amplifier would normally be located in a roof space, but care must be taken to ensure it is in a well ventilated space and kept clear of any insulation material.  Always ensure free ventilation and avoid covering the amplifier with soft furnishings when installed in a living room.

All digital signal installations should be installed using double screened coaxial cables and screened accessories only.  We recommend using fully screened outlet plates to protect the signals right up to the back of the TV or digital set-top box.